Semidirect Resin Composite Veneers in a Patient with Bruxism.

This case report details the esthetic rehabilitation of a 32-year-old male patient suffering from sleep bruxism, primarily manifesting as a fracture and significant loss of tooth structure in the anterior maxillary central incisors. To address these concerns, the patient underwent a restorative treatment involving the application of semidirect resin composite veneers on the maxillary incisors and direct resin composite restoration on the incisal regions of the maxillary canines. This approach not only restored the functional integrity of the teeth but also significantly enhanced the patient's esthetic appearance.

A Comparative Study of Shade-Matching Reproducibility Using an Intraoral Scanner and a Spectrophotometer.

BACKGROUND: We compared the repeatability of the shade determination of resin composite restorations and acrylic teeth in light and darker shades at baseline and after an aging process through two digital tooth color-matching methods: using a Trios 3Shape intraoral scanner and using a Vita Easyshade Compact spectrophotometer. MATERIAL AND METHODS: Forty upper central incisor acrylic teeth in the shade A1 (n = 10) and A3 (n = 10) were randomly assigned to be restored with Filtek Bulk Fill in the shade A1 (n = 10) or A3 (n = 10). Subsequently, 20 Class V cavities were prepared in a standardized manner (mesio-distal = 3.0 mm, cervical-occlusal = 2.0 mm, depth = 1.5 mm). Cavities were restored using an universal adhesive system and resin composite in two increments and were light-cured. The shade difference between the resin composite Class V restorations in acrylic teeth of the A1 and A3 shades was evaluated at baseline and after aging. Aging was simulated using ultraviolet light for 120 h. An Easyshade device and an intraoral scanner were used under D65 illumination. Measurements were taken five times, on top of the restoration and on the acrylic teeth, in a randomized manner. RESULTS: Data analysis was on the calculation of the arithmetic mean for the percentage of repeatability conducted by the Trios scanner and the Easyshade device. There was no statistically significant comparison between the shade measurement devices (p > 0.05). At baseline, the repeatability for both the Trios intraoral scanner and the Vita Easyshade Compact device for artificial teeth in the shades A1 and A3 was 100%. After aging, the trueness recorded by the intraoral scanner and the Easyshade device for artificial teeth in the shade A1 was 80%. For Class V restoration with shade A1, the intraoral scanner recorded 80% trueness and the Easyshade device recorded 60% trueness at baseline. For shade A3, the intraoral scanner recorded 60% trueness and the Easyshade device recorded 60% trueness. CONCLUSIONS: The intraoral scanner and Easyshade device are reliable for baseline shade selection, but their accuracy decreases after aging, particularly for darker shades.

The challenge of ceramic restorations on dark substrate: a case report.

The use of dental ceramics on anterior teeth is associated with predictable and long-lasting esthetic results. However, treatment on darkened substrates is challenging. Various conservative options, including ceramic veneers, are available to change the shape and color of anterior teeth. The aim of this case report is to describe the esthetic rehabilitation of a darkened central incisor in a maxillary anterior region that had irregular gingival contours, multiple composite resin restorations, and unsatisfactory tooth shapes. Harmony was restored through periodontal recontouring surgery, placement of a lithium disilicate crown (consisting of a veneer cemented to a coping) on the darkened central incisor, and placement of lithium disilicate veneers on the other maxillary anterior teeth.

Linear Accuracy of Intraoral Scanners for Full-Arch Impressions of Implant-Supported Prostheses: A Systematic Review and Meta-Analysis.

This article compares the accuracy of intraoral scanners (IOSs) used in the digital impression of full arches to fabricate implant-supported complete prostheses. This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines and was registered in the Open Science Framework (DOI 10.17605/OSF.IO/CPM9K). Six electronic databases, gray literature databases, and a manual search were performed in April 2022. Studies that evaluated the accuracy of intraoral scan impressions compared with conventional impressions in full-arch impressions were included for complete implant-supported prostheses. In addition, an adapted checklist for reporting in vitro studies was used to assess the risk of bias. Meta-analysis was conducted using a random-effects Hunter- Schmidt model. Nine studies were included in the analysis. IOS impressions present higher accuracy (137.86 µm) than conventional impressions (182.51 µm) (p<0.001). The heterogeneity of the study's methodology was I2»18.34. However, impression accuracy varies significantly with scan body type, IOS type, scanning strategy, and modification technique. For most IOS systems, the acceptable clinical threshold of linear accuracy of 200 µm can be achieved, except for the True Definition Scanner in one of the studies. Based on the results of the included studies, digital impressions using IOS present similar or better linear accuracy than conventional impression techniques.

Color difference between the vita classical shade guide and composite veneers using the dual-layer technique.

Background: The purpose of this in vitro study was to evaluate the color difference between the Vita Classical Shade Guide and composite veneers using the dual-layer technique. Material and Methods: Thirty samples were fabricated using a custom-made mold (Easy Layering Shade Guide Kit, 3M) using two resin composites: Filtek Supreme Ultra (3M); and Estelite Omega (Tokuyama) (n=3). The composite veneers were made by layering the different enamel and body or dentin shades from each composite. The color measurements were taken using a spectrophotometer (Vita Easyshade V®, Vita Zahnfabrik). The ΔE00 between the Vita Classical Shade Guide (Vita Zahnfabrik) and the composite veneers were calculated using the CIEDE2000 formula. Results: For the composite veneers using Filtek Supreme Ultra, the best match for A1 Vita shade was achieved layering either EA1 with DA2 or DA3; EA2 with DA1 or DA2 (ΔE00= 1.53 ~ 1.96 ± 0.4). For A2 Vita shade the best match would be EA3 with DA3 or EA3 with DA2 (ΔE00= 1.40 ~ 1.85 ± 0.1); or for A3 Vita shade the best match would be EA3 with DA2 2.50±(0.6). For the composite veneers using Estelite Omega, the were no best match for neither A1, A2 or A3 Vita shade (ΔE00> 2.5). Conclusions: The combination of enamel and dentin shades from Filtek Supreme Ultra provided acceptable color match for A1, A2 and A3 shades from the Vita Shade Guide, while Estelite Omega did not provide acceptable color match for any of the Vita Shade Guide standard shades tested. Key words:Color, color matching, optical properties, resin composite, layering.

Influence of different endodontic sealers on bond strength of fiber posts to weakened roots after resin restoration.

OBJECTIVES: To assess the influence of different sealers used in root canal filling, in terms of bond strength (BS) to dentin, after restoration of weakened roots using resin composite (RC) and fiber posts. MATERIAL AND METHODS: Roots of 39 maxillary incisors were used. After root canal preparation, root dentin was flared to produce a space between fiber post and root canal walls. The root canals were randomly distributed into three groups (n = 13), according to the sealer used: Endofill, AH Plus, and Acroseal. After removing the filling material to a depth of 12 mm, the flared roots were adhesively restored using RC. Posts were cemented and, after 24 h, roots were sectioned transversely producing 1-mm-thick slices. The slices from 30 roots were used for push-out test, and failure modes were noted. The remaining slices were analyzed by scanning electron microscopy (SEM). RESULTS: Statistical analysis by 2-way ANOVA showed a significant difference among sealers (p = 0.001) and among root regions (p < 0.001). The BS mean of Endofill was lower and significantly different from the others. Overall, the coronal region presented higher BS mean values, followed by the middle and apical regions of the reinforced roots. The most frequent failure type was the adhesive failure between RC and dentin. SEM analysis showed the formation of a hybrid layer and many tags in the coronal and middle regions, while the apical region exhibited remnants of the endodontic sealers in all groups. CONCLUSIONS: AH Plus and Acroseal sealer groups presented similar results, and the Endofill sealer negatively affected the BS of fiber post to restored root dentin. CLINICAL RELEVANCE: Weakened dentin walls are often found in teeth undergoing endodontic treatment, so the sealer used must allow or at least not interfere the bonding between restorative materials and root dentin.

Effect of grape seed extract-containing phosphoric acid formulations on bonding to enamel and dentin.

The aim was to evaluate the effect of 2% grape seed extract (GSE) containing phosphoric acid (PhA) on the bond strength to enamel and dentin. The control group was 37% PhA. The following three PhA formulations with 2% GSE and 20% ethanol were obtained: GSE5 = 5% PhA; GSE10 = 10% PhA; and GSE20 = 20% PhA. The enamel and dentin surfaces of molars were etched with the acid solutions, followed by Scotchbond Multi-Purpose adhesive and composite resin application. The tensile bond strength (TBS) test evaluated the bond to enamel after 24 h, and the microtensile bond strength (µTBS) test evaluated the bond to dentin after 24 h and 12-month water storage. Etched enamel and dentin were observed by scanning electron microscopy (SEM) and atomic force microscopy (AFM), respectively. The TBS data were submitted to one-way ANOVA, while µTBS data were submitted to two-way ANOVA and Tukey's test (α = 0.05). The TBS (MPa) to enamel did not significantly differ among the control (48.1 ± 15.7), GSE5 (46.1 ± 9.6), GSE10 (49.8 ± 13.6) and GSE20 (44.1 ± 11.9) groups (p = 0.537). The µTBS (MPa) to dentin of the control (28.4 ± 14.4) and GSE20 (24.1 ± 8.1) groups were significantly higher than those of the GSE5 (16.8 ± 7.4) and GSE10 (17.5 ± 6.6) groups at 24 h (p < 0.006). After 12-month storage, only GSE5 (21.0 ± 7.8) and GSE10 (17.6 ± 8.0) did not show significantly decreased µTBS (p > 0.145). SEM micrographs showed a shallower enamel etching pattern for GSE5. AFM images showed the formation of collagenous globular structures for GSE5 and GSE10. The different acid solutions did not influence the TBS to enamel, and the µTBS to dentin was stable over time when dentin was etched with GSE5 and GSE10.

Effect of grape seed extract-containing phosphoric acid formulations on bonding to enamel and dentin

Abstract The aim was to evaluate the effect of 2% grape seed extract (GSE) containing phosphoric acid (PhA) on the bond strength to enamel and dentin. The control group was 37% PhA. The following three PhA formulations with 2% GSE and 20% ethanol were obtained: GSE5 = 5% PhA; GSE10 = 10% PhA; and GSE20 = 20% PhA. The enamel and dentin surfaces of molars were etched with the acid solutions, followed by Scotchbond Multi-Purpose adhesive and composite resin application. The tensile bond strength (TBS) test evaluated the bond to enamel after 24 h, and the microtensile bond strength (μTBS) test evaluated the bond to dentin after 24 h and 12-month water storage. Etched enamel and dentin were observed by scanning electron microscopy (SEM) and atomic force microscopy (AFM), respectively. The TBS data were submitted to one-way ANOVA, while µTBS data were submitted to two-way ANOVA and Tukey's test (α = 0.05). The TBS (MPa) to enamel did not significantly differ among the control (48.1 ± 15.7), GSE5 (46.1 ± 9.6), GSE10 (49.8 ± 13.6) and GSE20 (44.1 ± 11.9) groups (p = 0.537). The µTBS (MPa) to dentin of the control (28.4 ± 14.4) and GSE20 (24.1 ± 8.1) groups were significantly higher than those of the GSE5 (16.8 ± 7.4) and GSE10 (17.5 ± 6.6) groups at 24 h (p < 0.006). After 12-month storage, only GSE5 (21.0 ± 7.8) and GSE10 (17.6 ± 8.0) did not show significantly decreased μTBS (p > 0.145). SEM micrographs showed a shallower enamel etching pattern for GSE5. AFM images showed the formation of collagenous globular structures for GSE5 and GSE10. The different acid solutions did not influence the TBS to enamel, and the µTBS to dentin was stable over time when dentin was etched with GSE5 and GSE10.

Fracture resistance of veneers in premolars.

OBJECTIVE: The purpose of the study was to compare the fracture resistance of ceramic veneers and composite resin veneers with and without dental preparation. MATERIALS AND METHODS: Forty freshly extracted mandibular premolars were selected and randomly assigned into four groups (n = 10): Group NPR = no dental preparation and direct veneer with 0.2 mm thick composite resin (Amelogen Plus, Ultradent); Group NPC = no dental preparation and 0.2 mm thick lithium disilicate ceramic veneer (IPS e.max Press, Ivoclar Vivadent); Group P2C = Tooth preparation of 0.2 mm and 0.2 mm thick ceramic veneer (IPS e.max Press); and Group P5C = Tooth preparation of 0.5 mm and 0.5 mm-thick ceramic veneer (IPS e.max Press). In all groups, the restorations covered 1 mm of the occlusal surface of the buccal cusp, and the thickness of this area was the same of the buccal area (0.2 mm or 0.5 mm). After the luting procedure, all groups were thermocycled (10,000 cycles, 5°C-55°C) and subjected to fracture resistance test under compression (Instron 4444 with a crosshead speed of 0.5 mm/min). The mode of failure analysis was performed under a ×10 magnification. Data were subjected to one-way ANOVA and Duncan's post hoc test (P < 0.05). RESULTS: The mean fracture resistance (men ± standard deviation) was NPR = 690.33 ± 233, NPC = 790.52 ± 408, P2C = 1131.34 ± 341, and P5C = 983.56 ± 202. There were significant differences of the fracture resistance values between all groups (P = 0.013). NPR and NPC groups showed mean values of fracture resistance significantly lower than P2C. However, P5C presented intermediate values without a significant difference from the other groups. The mode of failure for all groups was mixed (60%), cohesive failures (20%), root failures (15%), and adhesive failures (5%). CONCLUSION: Minimally invasive tooth preparation (0.2-mm) allowed to achieve higher fracture resistance in premolars restored with lithium disilicate ceramic veneers. Attention should be given to the 0.5 mm preparation since catastrophic fractures only happened when this preparation depth was performed.

Enamel hypoplasia: challenges of esthetic restorative treatment.

Enamel defects, such as white or yellow-brown spots, usually cause problems that are more esthetic than functional. Enamel hypoplasia may be the result of hereditary, systemic, or local factors. Dental trauma is a local etiologic factor. It is relatively common in the primary dentition and can cause defects on the surface of permanent successors. Treatment for such defects can differ, depending on the depth of the spots. For deeper white-spot lesions, a composite resin restoration may be necessary. This is an excellent mode of treatment, due to both its low cost and its conservation of healthy tooth structure. The objective of this case report is to describe composite resin restoration of a maxillary central incisor affected by enamel hypoplasia.

Different Strategies to Bond Bis-GMA-based Resin Cement to Zirconia.

PURPOSE: To evaluate the effect of different bonding strategies on short- and long-term bis-GMA-based resin cement bond strengths to zirconia. MATERIALS AND METHODS: One hundred twenty samples of fully-sintered zirconia (Prettau Zirconia) were sandblasted and randomly distributed into 5 groups (n = 24): UA: Scotchbond Universal Adhesive; SZP: Signum Zirconia Bond I + II; ZPP: Z-Prime Plus; EXP: MZ experimental primer; CO: no primer application (control). After performing these surface treatments, translucent tubes (0.8 mm diameter and 1.0 mm height) were placed on the zirconia specimens, and bis-GMA-based cement (Duo-Link) was injected into them and light cured. Specimens were tested for microshear bond strength either 24 h or 6 months (m) after water storage (37°C) and surfaces were characterized by SEM and EDX. Two-way ANOVA and Tukey's post-hoc test (p < 0.05) were used to evaluate bond strength results. RESULTS: The mean bond strengths (MPa ± SD) were: UA=14.6 ± 4.7a (24 h); 16.0 ± 4.8a (6 m); SZP = 14.0 ± 5.4ab (24 h); 11.9 ± 2.6ab (6 m); ZPP=8.0 ± 1.8b (24 h); 8.6 ± 3.3b (6 m); EXP = 1.2 ± 0.5c (24 h); 0.6 ± 0.7c (6 m); CO=1.0 ± 1.2c (24 h); 1.3 ± 1.2c (6 m). Bonding strategy significantly influenced bond strength (p = 0.0001), but storage time did not (p = 0.841). Groups UA and SZP showed a homogeneous layer covering the zirconia surface. In these groups, EDX demonstrated the presence of phosphorus. Group ZPP resulted in a nonhomogeneous layer, exposing the zirconia substrate underneath. EXP application resulted in an undetectable layer. CONCLUSION: Water storage did not affect resin cement bond strengths to zirconia irrespective of the surface treatment. Bis-GMA-based resin cement bond strengths to zirconia are affected by specific bonding strategies.

One-year Clinical Evaluation of Resin Composite Restorations of Noncarious Cervical Lesions in Smokers.

PURPOSE: To evaluate the one-year clinical performance of composite restorations in noncarious cervical lesions placed in smoking and non-smokers using a multimode adhesive system with two adhesive strategies. MATERIALS AND METHODS: Among the selected cervical lesions, four experimental groups were formed based on the patients' smoking habit and bonding strategies with a multimode adhesive system (n = 38): G1: etchand- rinse in non-smokers; G2: selective enamel etching in non-smokers; G3: etch-and-rinse in smokers; G4: selective enamel etching in smokers. The restorations were paired, ie, each patient received at least two restorations. A nanofilled resin composite was applied and light cured incrementally in all groups by one operator. Two calibrated examiners evaluated the restorations at baseline, 6 and 12 months after placement. The modified USPHS criteria were used for evaluation. Data were analyzed using the chi-square (for associations between groups) and McNemar tests. RESULTS: No statistically significant difference was found between groups for the criteria of retention, marginal discoloration, color match, marginal integrity, or sensitivity after 6 and 12 months. The assessments over time showed a statistically significant difference only for marginal discoloration at 12 months for groups 1, 3, and 4 when compared to baseline (p = 0.031). There were no statistical differences for any criteria evaluated among smokers and non-smokers, except for color match, where a difference was found after the baseline evaluation. Regarding the adhesive strategy, etch-and-rinse resulted in a clinical performance similar to that of selective enamel etching over 12 months. CONCLUSION: Neither cigarette smoking habit nor adhesive strategy influenced the clinical performance of resin composite cervical restorations over the first year.

Correlation between clinical performance and degree of conversion of resin cements: a literature review.

Resin-based cements have been frequently employed in clinical practice to lute indirect restorations. However, there are numerous factors that may compromise the clinical performance of those cements. The aim of this literature review is to present and discuss some of the clinical factors that may affect the performance of current resin-based luting systems. Resin cements may have three different curing mechanisms: chemical curing, photo curing or a combination of both. Chemically cured systems are recommended to be used under opaque or thick restorations, due to the reduced access of the light. Photo-cured cements are mainly indicated for translucent veneers, due to the possibility of light transmission through the restoration. Dual-cured are more versatile systems and, theoretically, can be used in either situation, since the presence of both curing mechanisms might guarantee a high degree of conversion (DC) under every condition. However, it has been demonstrated that clinical procedures and characteristics of the materials may have many different implications in the DC of currently available resin cements, affecting their mechanical properties, bond strength to the substrate and the esthetic results of the restoration. Factors such as curing mechanism, choice of adhesive system, indirect restorative material and light-curing device may affect the degree of conversion of the cement and, therefore, have an effect on the clinical performance of resin-based cements. Specific measures are to be taken to ensure a higher DC of the luting system to be used.

Correlation between clinical performance and degree of conversion of resin cements: a literature review

AbstractResin-based cements have been frequently employed in clinical practice to lute indirect restorations. However, there are numerous factors that may compromise the clinical performance of those cements. The aim of this literature review is to present and discuss some of the clinical factors that may affect the performance of current resin-based luting systems. Resin cements may have three different curing mechanisms: chemical curing, photo curing or a combination of both. Chemically cured systems are recommended to be used under opaque or thick restorations, due to the reduced access of the light. Photo-cured cements are mainly indicated for translucent veneers, due to the possibility of light transmission through the restoration. Dual-cured are more versatile systems and, theoretically, can be used in either situation, since the presence of both curing mechanisms might guarantee a high degree of conversion (DC) under every condition. However, it has been demonstrated that clinical procedures and characteristics of the materials may have many different implications in the DC of currently available resin cements, affecting their mechanical properties, bond strength to the substrate and the esthetic results of the restoration. Factors such as curing mechanism, choice of adhesive system, indirect restorative material and light-curing device may affect the degree of conversion of the cement and, therefore, have an effect on the clinical performance of resin-based cements. Specific measures are to be taken to ensure a higher DC of the luting system to be used.

Silanization effect on microtensile bond strength of a self-adhesive luting material to a disilicate-based glass ceramic

Introduction: The rehabilitation of teeth by means of ceramic indirect restorations has been widely performed. Previous studies has shown the effectiveness of silane coupling agents on improving the bond strength of the adhesion of resin cements to ceramics; however, some studies question the use of silane. Objective: To evaluate the effect of silane application on the microtensile bond strength of an auto-adhesive luting material to a lithium disilicate glass-ceramic. Material and methods: Two blocks (9x11x4mm) of lithium disilicate glass-ceramic had one of their surfaces polished (# 220, 360, 600 grit silicon-carbide abrasive papers) and cleaned ultrasonically. The ceramic blocks were then divided into two groups according to the surface treatment: G1 (control group): etched with 10% hydrofluoric acid for 20s and silane coated; G2: etched with 10% hydrofluoric acid for 20s. After building two blocks of composite resin (Filtek Z350) with the same dimensions of the ceramic blocks, the self-adhesive resin cement (SpeedCEM) was applied directly to the ceramic surface and the resin block was seated on the cement. After storage (24h, 37°C), the ceramic-cement-composite blocks were cut with an Isomet low-speed diamond saw machine producing sticks, which were loaded to failure at a crosshead speed of 0.5 mm/min. The type of fracture was analyzed under an optical microscope. The results were statistically analyzed using the Student t test. Results: The mean microtensile and standard deviations in megaPascals were: G1 = 21.32 (± 4.36) and G2 = 16.55 (± 4.92). Statistical analysis showed that the bond strength was not significantly affected by the surface treatment with silane. Most of the fractures occurred within the adhesion zone. Conclusion: The application of silane had no significant effect on the bond strength between lithium disilicate glass-ceramic and self-adhesive resin cement.

Planejamento em facetas de porcelana: parte 2: preparação dental, a chave do sucesso / Designing porcelain laminate veneers: part 2: tooth preparation, the key of success

O alto grau de estética alcançado com facetas de porcelana, não só pela característica óptica natural inicial, mas principalmente por se manter o efeito obtido ao longo dos anos, tornou-as indicadas em várias situações clínicas, entre as quais está a substituição de facetas de resina composta. Estudos clínicos e testes laboratoriais têm ajudado a comprovar que os laminados cerâmicos são uma excelente forma de restabelecer a estética e a função de dentes anteriores de forma conservadora, pois geralmente o preparo se restringe apenas à porção vestibular do esmalte. As etapas clínicas para a confecção de uma faceta de porcelana são apresentadas e discutidas, na tentativa de demonstrar as possibilidades dessa modalidade restauradora...

The high level of aesthetics achieved by the use of porcelain laminate veneers is explained not only by the initial natural optical features, but by the maintenance over the years. This has made porcelain veneers indicated in several clinical situations. Among these indications are replacing resin composite veneers. Clinical and laboratory tests have helped to show that the ceramic veneers are an excellent approach to conservatively restore aesthetics and function of anterior teeth because the preparation is only restricted to enamel in the labial aspect. Thus, the clinical steps for a porcelain veneer treatment will be presented and discussed in an attempt to demonstrate the possibilities of this restorative approach...

Two-year clinical performance of a two-step etch-and-rinse adhesive in non-carious cervical lesions: Influence of subject's age and dentin etching time.

AIM: The aim of this study was to evaluate the influence of the subject's age and dentin etching time on the clinical performance of a two-step etch-and-rinse adhesive in class V non-carious cervical lesions (NCCLs). MATERIALS AND METHODS: Forty patients with NCCLs (classified as degrees 2 and 3 of dentin sclerosis) were enrolled in this study. The lesions were selected and assigned into two groups (n = 70/group) according to the subject's age: (G1) between 21-35 years old and (G2) between 40-54 years old. Each group was randomly divided into two subgroups (n = 35/group) according to dentin etching time using recommended application time (15 s) and an extended application time (30 s). A total of 140 restorations with XP Bond (Dentsply DeTrey, Germany) were placed. The composite resin Esthet X (Dentsply) was placed incrementally. All restorations were evaluated using the modified USPHS criteria. Data was analyzed by the McNemar and chi-square tests (p < 0.05). RESULTS: At the end of 2 years, 132 restorations (94.2% recall rate) were evaluated. The 24-month retention rates (%) were 93.5 for G1(15), 97.1 for G1(30), 93.9 for G2(15), and 97.0 for G2(30). There were no statistical differences in the retention rates in each recall period among groups. CONCLUSION: For the selected age groups, neither the subject's age nor the etching time had any influence on the clinical performance of XP Bond adhesive in NCCLs over a 24-month period. CLINICAL RELEVANCE: The clinical effectiveness of the XP Bond was excellent after 2 years of clinical service. Long-term clinical evaluations are necessary to confirm this finding.

Restauração Classe IV: estratificação natural com resina composta / Class IV restorations: natural stratification with composite resin

Restaurar apenas um dente anterior fraturado é um desafio para a Odontologia Estética, em função do restabelecimento da forma e da cor, necessárias para a reprodução fiel das características do dente natural. Este artigo apresenta algumas estratégias para facilitar o planejamento e a execução de uma restauração Classe IV no incisivo central superior com resina composta nanoparticulada, mediante o uso de um mapa cromático com a seleção das cores, seguido de um ensaio restaurador. Passados 5 dias, o ensaio foi avaliado e realizada a restauração definitiva. As etapas de acabamento, polimento e texturização foram conduzidas para mimetizar a estrutura dental...

Restoration of a single anterior fractured tooth is a challenge in aesthetic dentistry, since it is difficult to reestablish form and color, necessary for the accurate reproduction of the features present in natural teeth. This article presents some strategies facilitating the planning and execution of a Class IV restoration in the maxillary central incisor with nanoparticle composites through the use of a chromatic map, followed by a mock-up. After 15 days, the assay was evaluated and the definitive restoration was fabricated, followed by the final finishing, polishing and texturing to mimic the tooth structure...

Restauração em dente posterior com resina de baixa contração: relato de caso clínico / Restoration in posterior tooth with a low-shrinkage composite resin: clinical case report

A contração de polimerização ainda é um grande inconveniente dos materiais restauradores adesivos diretos. Com o objetivo de minimizar esse problema, foram introduzidas no mercado resinas de baixa contração. Uma delas é a resina à base de silorano, que combina as vantagens do silorano, o qual lhe confere hidrofobicidade, e o oxirano, que resulta em baixa contração volumétrica. Assim, por suas boas propriedades mecânicas e baixa contração volumétrica, ela é indicada para restaurações em dentes posteriores. O objetivo do presente artigo é apresentar o caso clínico de uma restauração de classe I realizada com resina de baixa contração à base de silorano.

Polymerization shrinkage is a major drawback of direct restorative materials. In order to minimize this problem, low-shrinkage composite resins were introduced. Silorane-based composites combine the advantages of the silorane, which conveys hydrophobicity, and oxirane which results in low volumetric shrinkage. They are indicated for restorations in posterior teeth due to their suitable mechanical properties and low shrinkage. The aim of this paper is to present a clinical case of a Class I restoration performed with low shrinkage silorane-based composite resin.